Basic Water Heater Repair

Water heaters come in two basic styles: electric or gas. If water is not as hot as you would like, running cold, or running out of hot water a lot faster than it used to, use these tips to repair your hot water heater. More tips at water heater repair Austin.


Make sure the circuit breaker on the water heater is on and sending electricity to the hot water heater. Reset the high-temperature cutoff over the water heater's upper thermostat. This could be the root of the problem, and it is a fix that is free of any costs. 


The heating element on the electric varieties is prone to failure. The good part is that the rest of the electric water heater is still in good working order and has a long life ahead of it. That means that water heater repair makes sense because it outweighs the costs to purchase and install a new water heater. 


This is most likely to be the case if your water heater  takes a lot longer to heat water or runs out of hot water a lot more quickly than it did when you first installed it. Did you know that the replacement heating elements -- of which there are two -- are very affordable, costing only up to $20 per element? 


Now, keep in mind most water heaters have a lifespan of between 10 to 15 years. If the old water heater is nearing this age bracket, it could make more sense to get a new one. 


The reasons are several. For one, they have become much more energy efficient even in the past 10 to 15 years. Also, you may now opt for a tankless heater, which is more costly up front but costs less to own, because it heats water at the point of use. Those are just some of the basics of hot water repair. Consider them first before rushing out to buy a new water heater.

Write a comment

Comments: 0